AUTO-CODE
CAM Software for AutoCAD

Documentation PDF Files


The following are PDF (Adobe Acrobat) files.  You will need to have the Acrobat plug in installed on your browser to view them.

Reference Manual
AutoCAD 2006 Installation Note for Menus

Tutorials
Mill 1 - learn about mill programming with AUTO-CODE.  Simple drill and pocket operations introduced.
Mill 2 - more about tool changing and an introduction to leaders.
Laser - learn about subroutine programming and leaders
Turn - learn how to program a lathe with AUTO-CODE. Rough cutting, finish cutting, tool changes.
Tutorials are based on generic interfaces and may not reflect how your specific interface would best run.  Tutorials may be used in a class room environment for instructional purposes or can be used to demonstrate the basic operations of the software.

Version 4.2 (AutoCAD 2000-2002) Reference Manual
Installation
AUTO-CODE Concepts and Theory - Explains how AutoCAD and AUTO-CODE mix to create a CAD/CAM system.
Mill Programming - Reference Section for mill interface
Lathe Programming  - Reference Section for turning interface
Flame/ Plasma Programming  - Reference Section for flame and plasma cutting interface
Laser Programming  - Reference Section for laser cutting interface
Wire EDM Programming  - Reference Section for wire EDM interface
Punch Press Programming  - Reference Section for punch press interface
Run Time Calculator - Reference for using the run time calculator ( Excel example requires Excel8.olb)
Additional documentation can be found in the online help files provided with the program.
Please remember that AUTO-CODE requires the full implementation of AutoCAD to run.

Return to AUTO-CODE information page.

(c)1986-2006 AUTO-CODE MECHANICAL